We will use reference angles to model two large flat plates that are not pictured above and are held with rubber bands. This will allow a side or an edge to always be, for example, 30 degrees off of a side or an edge in one direction.
- In order to have the connecting brackets to have a certain angle, we used 3 user defined constraints. Hole – hole, face – face, edge – edge (angle offset).
WindChill WorkSpace Not Updating Solution
- https://www.ptcusercommunity.com/thread/138893?sr=inbox&ru=272252
- According to the post I had made on the PTC Creo forums, I was told that there were 2 options of solving this updating issue.
- When updating, Windchill client defaults to keeping changed objects and not updating. Look for a checkbox – I forget the exact wording – that indicates keeping the existing models.
Alternatively look at using ADD to force WIndchill to download the latest models, but notice it has the same button to keep the models in the workspace as-is, and not add the latest ones.
- When updating, Windchill client defaults to keeping changed objects and not updating. Look for a checkbox – I forget the exact wording – that indicates keeping the existing models.
- However, I was unable to find where these options were.
9/24/16 CAD